The contents of this page may be found at https://www.laptopdirect.co.za. The contents are copyright. Although every effort has been made to ensure the accuracy of information, no reliance may be placed on the accuracy of the contents or any price found on this site. Any and all information should be used for reference purposes only. This site is neither owned nor operated by Cudy™©, but it is offered as an extension to laptopdirect.co.za as a reseller service to the public. We hold no claim whatsoever to the brand/s, logo/s or any other property or rights owned by Cudy™©. The information and pricing may have been valid prior to this page being captured, however, a print is not a valid advertisement for pricing nor specifications, and only products that have been sent by quote are valid. Prices are subject to change without prior notice. T&C's apply.

POE40

Cudy POE40 4 Port Gigabit PoE++ with 1x PoE Input 60W Switch

Cudy - Cudy POE40 4 port Gigabit PoE++ with 1x PoE Input 60W Switch, Connect a single 802.3bt/at/af PoE Input on Port 5, Split it into Four Gigabit PoE Outputs delivering up to 30W, Max Power Output of 2x 30W or 4x 12.95W across the Four Output Ports
BUY TODAY ! Expected to be in Stock at suppliers.* print


POE40 Cudy POE40 4 Port Gigabit PoE++ with 1x PoE Input 60W Switch Image 2
POE40 Cudy POE40 4 Port Gigabit PoE++ with 1x PoE Input 60W Switch Image 3
POE40 Cudy POE40 4 Port Gigabit PoE++ with 1x PoE Input 60W Switch Image 4
POE40 Cudy POE40 4 Port Gigabit PoE++ with 1x PoE Input 60W Switch Image 5
Not rated yet



Rate this product

Specials
Prices, images and descriptions are for reference purposes only & may change without prior notice. PLEASE RELY ON ABOVE DESCRIPTIONS AND NOT ON IMAGES. POE40 Cudy POE40 4 Port Gigabit PoE++ with 1x PoE Input 60W Switch is available from Laptop Direct and it is sold as new from our Power over Ethernet POE range of products. For reference purposes, the price of R570 is valid 2026-09-23, and while stocks last, may be valid until . The price displayed is a guide for reference purposes only, and may change without prior notice. Reference prices are an invitation for potential buyers to make an offer to purchase, which we may reject without reason. A quote with final pricing is sent before a purchase can be made. T&C's apply. E&OE. Laptop Direct. You are looking at products found in the Power over Ethernet POE category.
Subscribe

Specification for the entire series

Important information: Kindly note that specifications differ between models. Features, options and accessories displayed below this paragraph are not included with this product unless it has been specified in the above description.


Please remember these important points when reading the information below this paragraph: Operating systems cannot be removed or changed, monitors are not included with computers, free Anti-virus and Office Software are trial versions or may have limited features and an additional license needs to be purchased to activate the full product.

POE40

Cudy POE40 4 Port Gigabit PoE++ with 1x PoE Input 60W Switch

Cudy POE40 4 port Gigabit PoE++ with 1x PoE Input 60W Switch, Connect a single 802.3bt/at/af PoE Input on Port 5, Split it into Four Gigabit PoE Outputs delivering up to 30W, Max Power Output of 2x 30W or 4x 12.95W across the Four Output Ports

Overview Summary:

The Cudy POE40 is a practical 4-port Gigabit PoE++ extender that lets you distribute power and data from a single PoE input to multiple connected devices. With extended transmission support, VLAN isolation and PoE Watchdog functionality, it is suitable for reliable network installations.

Ideal for IP cameras, wireless access points, VoIP phones and access control devices, the POE40 offers flexible desktop or wall-mount installation in a durable metal housing. Buy now for a convenient way to extend your PoE network, or shop now for dependable network expansion.

What tier does this fall into?

Professional

What is this best for?

IP cameras, wireless access points, VoIP phones, access control devices, network expansion, PoE network installations

Overview:

The Cudy POE40 4-Port Gigabit PoE++ Extender provides a practical way to extend both network data and PoE power beyond the usual 100-metre Ethernet distance. It accepts a single 802.3bt, 802.3at or 802.3af PoE input through Port 5 and distributes the connection across four Gigabit PoE output ports. This makes it suitable for IP cameras, wireless access points, VoIP phones, access control readers and other powered network devices that need to be installed farther from the main network switch.

Description:

The Cudy POE40 is designed for installations where one upstream PoE connection needs to supply multiple powered devices. Each of the four output ports can provide up to 30W, with a maximum distribution of either two 30W devices or four devices receiving up to 12.95W each. In standard mode, connected devices can operate over distances of up to 100 metres at Gigabit Ethernet speeds.

For longer cable runs, Extend mode increases the transmission distance to up to 250 metres using Cat 5e or better network cable. This mode is intended for extended installations where speed requirements are lower, with network speed limited to 10 Mbps. VLAN mode can also isolate the four downstream ports from each other, helping improve network separation and security.

The built-in PoE Watchdog adds another layer of reliability by monitoring connected devices and automatically restoring power when an unresponsive PoE client is detected. For larger installations, up to three Cudy POE40 units can be daisy-chained to achieve greater network reach.

Features:

Gigabit PoE++ Extension for Network Devices
The Cudy POE40 combines PoE power distribution with Ethernet extension in a compact enclosure. A single PoE connection from the upstream network can be divided between four downstream PoE ports, reducing the need for additional power supplies at the remote location.

It supports common PoE standards, making it suitable for a range of compatible network equipment:

  • 1x Gigabit PoE input supporting 802.3bt, 802.3at and 802.3af
  • 4x Gigabit PoE output ports supporting 802.3at and 802.3af
  • Up to 30W available from an individual output port
  • Maximum output of 2x 30W or 4x 12.95W across the four ports
  • Standard transmission distance of up to 100 metres at Gigabit speeds
  • Extend mode supports distances of up to 250 metres at 10 Mbps
  • Compatible with Cat 5e or higher network cable

Reliable PoE Protection and Network Operation
For installations where network equipment needs dependable power delivery, the POE40 includes multiple protection measures. These help protect connected hardware against common electrical and environmental risks while supporting stable operation.

Protection includes polarity protection, overvoltage protection, short-circuit protection and automatic voltage regulation. The unit also provides 6kV lightning and surge protection, 6kV ESD contact protection and 8kV ESD air protection.

The PoE Watchdog function continuously monitors connected devices and can automatically recover devices that stop responding, reducing the need for manual intervention.

Flexible Installation for Cameras, WiFi and VoIP
The Cudy POE40 is well suited to installations where several PoE devices need to be positioned away from the primary network switch. It can be used with IP surveillance cameras, wireless access points, VoIP telephones, access readers and other compatible PoE network equipment.

VLAN mode provides additional isolation between downstream ports, which can be useful where connected devices should remain separated from one another. The ability to daisy-chain up to three POE40 extenders also provides greater flexibility for larger network layouts.

The durable all-metal housing allows the extender to be installed on a desktop or mounted on a wall, making it suitable for offices, security installations, commercial premises and other network environments.

Cudy POE40 2.0 Technical Details

  • Brand: Cudy
  • Model: POE40 2.0
  • Manufacturer Part Number / SKU: POE40
  • Product Type: 4-channel Gigabit PoE++ Extender
  • PoE Standard: 802.3af/at/bt
  • Input: 1x Gigabit PoE input
  • Outputs: 4x Gigabit PoE outputs
  • Maximum Output: 2x 30W or 4x 12.95W
  • Extend Distance: Up to 250 metres at 10 Mbps
  • Standard Distance: Up to 100 metres at Gigabit speeds
  • Colour: Grey
  • Product Weight: 254g
  • Product Dimensions: 11.9 x 8.5 x 2.8 cm
  • Installation: Desktop or wall mount
  • Pack Quantity: 1

Whats' include


The package includes the Cudy 4-Channel Gigabit PoE++ Extender, a mounting kit and an installation guide, providing the essential components needed to install the POE40.

The Cudy POE40 is a compact choice for extending PoE-powered network connections while supporting multiple downstream devices from a single upstream PoE source. With Gigabit connectivity, long-distance Extend mode, VLAN isolation, PoE Watchdog recovery and multiple protection functions, it provides a flexible solution for expanding wired network and PoE installations.


Specifications:

© 2026 Respective owners and brand holders. This table has been carefully researched and generated by Laptop Direct CC (https://www.laptopdirect.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specificationsspacer
Product CodePOE40spacer
Brand Cudy
Model Number POE40 2.0
Manufacturer Part Number POE40
Colour Grey
Product Weight 254g
Product Dimensions (L x W x H) 11.9 x 8.5 x 2.8
Accessory Type PoE Extender
Standard / Category 802.3af/at/bt
Pack Quantity 1

Reviews POE40 Cudy POE40 4 Port Gigabit PoE++ with 1x PoE Input 60W Switch

Review
Do you have an opinion about this product? [+] Add your review

This product has not been rated yet.

Inttel processors - Tarsus