AP-FIC-010A-015

Vivotek AP-FIC-010A-015 15W Indoor IEEE802.3af FE PoE Injector

About this product

The VIVOTEK AP-FIC-010A-015 is an indoor IEEE 802.3af Fast Ethernet PoE injector that delivers up to 15.4W of PoE power to compatible network devices over Ethernet. With 10/100Mbps Fast Ethernet connectivity, automatic PoE PD detection, overcurrent protection and short circuit protection, it is designed for powering compatible IP cameras and other IEEE 802.3af powered devices. Buy this VIVOTEK PoE injector from our website for a practical network power solution in South Africa.

Overview Summary

VIVOTEK AP-FIC-010A-015 15W Indoor IEEE 802.3af FE PoE Injector provides both Ethernet data and electrical power to a compatible IEEE 802.3af powered device through a single network cable. It is designed for indoor network installations where a PoE switch is not available or where an individual PoE connection is required.

The injector features 2 x 10/100Mbps RJ45 ports, with one Data IN connection and one Power + Data OUT connection. It provides 54VDC PoE output with a maximum output power of 15.4W and supports automatic detection of compatible PoE powered devices.

The AP-FIC-010A-015 supports IEEE 802.3 and IEEE 802.3u Ethernet standards and is suitable for compatible VIVOTEK IEEE 802.3af network cameras. Built-in overcurrent and short circuit protection provides additional protection for the PoE installation.

What tier does this fall into?

Entry-level indoor Fast Ethernet PoE injector

What is this best for?

IP cameras, network cameras, IEEE 802.3af powered devices, indoor surveillance installations, Ethernet power delivery

Description

The VIVOTEK AP-FIC-010A-015 is an indoor Fast Ethernet Power over Ethernet injector designed to provide power and network connectivity to compatible IEEE 802.3af powered devices. The injector allows a standard Ethernet connection from a non-PoE network switch to be combined with electrical power before being delivered to a compatible powered device.

The unit provides 2 x 10/100Mbps RJ45 Ethernet ports. The Data IN port connects to a standard network switch, while the Power + Data OUT port connects to the powered device. This configuration makes the injector suitable for installations where the existing network switch does not provide PoE.

With a maximum PoE output of 15.4W at 54VDC, the AP-FIC-010A-015 is designed for compatible IEEE 802.3af equipment. VIVOTEK documentation identifies compatibility with VIVOTEK IEEE 802.3af network cameras, making it suitable for selected indoor IP surveillance installations.

Automatic PoE powered-device detection helps identify compatible devices before PoE power is supplied. The injector also incorporates overcurrent protection and circuit shorting protection. Power and PoE LED indicators provide a convenient way to check the operating status of the unit.

The injector accepts 100-240VAC at 50-60Hz and has a maximum power consumption of 19W. Its compact 146 x 64 x 42mm enclosure and 0.2kg weight make it suitable for space-conscious indoor network installations.

Features

The VIVOTEK AP-FIC-010A-015 combines Ethernet connectivity and PoE power delivery in a compact indoor injector designed for compatible IEEE 802.3af equipment.

IEEE 802.3af Power over Ethernet support
Maximum PoE output power of 15.4W
54VDC PoE output
2 x 10/100Mbps RJ45 Ethernet ports
1 x Data IN port
1 x Power + Data OUT port
Automatic PoE powered-device detection
Overcurrent protection
Short circuit protection
Power LED status indication
PoE LED status indication
Compatible with VIVOTEK IEEE 802.3af network cameras
Supports IEEE 802.3 10BASE-T Ethernet
Supports IEEE 802.3u 100BASE-TX Fast Ethernet
Designed for indoor installation

What's in the Box

1 x VIVOTEK AP-FIC-010A-015 PoE injector
1 x AC power cord
1 x Quick Installation Guide

Specifications

© 2026 Respective owners and brand holders. This table has been carefully researched and generated by Laptop Direct CC (https://www.laptopdirect.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications and features
Product Code	AP-FIC-010A-015
Details
Model	AP-FIC-010A-015
IP Camera Compatibility
Video Resolution	Megapixel/D1/VGA
Video Compression	MJPEG/MPEG-4/H.264/H.265
Compatible Camera List	VIVOTEK Network Cameras
Ethernet
Fast Ethernet (RJ45)	1
Standards
IEEE 802.3 10-BASE-T (Ethernet)	Supported
IEEE 802.3u 100-BASE-TX (Fast Ethernet)	Supported
IEEE 802.3af Power over Ethernet	Supported
Transmission Media
10Base T	Cat. 3, 4, 5 UTP/STP
100Base TX	Cat. 5, 5e UTP/STP
PoE Function
Number of PoE Out Ports	1
PoE Output Power	54VDC/15.4W
802.3af Standard Compatible	Yes
Over Current Protection	Supported
Circuit Shorting Protection	Supported
Power Pin Assignment	1/2(+), 3/6(-)
PoE PD Auto Detection	Supported
General
LED Indicators	Power, PoE
Power Input	100~240VAC / 50~60Hz
Power Consumption	19W
Dimensions	146 (L) x 64 (W) x 42 (H) mm
Weight	0.2 kg
Operating Temperature	0degreesC ~ 50degreesC (32degreesF ~ 122degreesF)
Storage Temperature	-20degreesC ~ 70degreesC (-4degreesF ~ 158degreesF)
Humidity	Operating: 10~90% (Non-condensing)
Humidity	Storage: 10~90% (Non-condensing)
Safety Certifications	CE, C-Tick, FCC, VCCI, LVD
Accessory
Included Accessories	Power cord, QIG

FAQ

What is the VIVOTEK AP-FIC-010A-015 used for?

The VIVOTEK AP-FIC-010A-015 is used to provide Ethernet data and PoE power to compatible IEEE 802.3af powered devices, including compatible IP network cameras.

How much power does the AP-FIC-010A-015 provide?

The injector provides 54VDC PoE output with a maximum output power of 15.4W.

Does the VIVOTEK AP-FIC-010A-015 support Gigabit Ethernet?

No. The AP-FIC-010A-015 uses Fast Ethernet and supports 10/100Mbps Ethernet connections. It does not support Gigabit Ethernet.

Does the AP-FIC-010A-015 support IEEE 802.3af PoE?

Yes. The AP-FIC-010A-015 supports the IEEE 802.3af Power over Ethernet standard.

Can the AP-FIC-010A-015 power an IP camera?

Yes. It is designed for compatible IEEE 802.3af powered devices and is specifically documented as compatible with VIVOTEK IEEE 802.3af network cameras.

How do I connect the VIVOTEK AP-FIC-010A-015?

Connect the Data IN port to a non-PoE network switch using an Ethernet cable, then connect the Power + Data OUT port to the compatible powered device using another Ethernet cable.

What type of Ethernet cable is supported?

The injector supports Cat. 3, Cat. 4 and Cat. 5 UTP/STP for 10Base-T and Cat. 5 and Cat. 5e UTP/STP for 100Base-TX. VIVOTEK recommends standard Cat. 5e or Cat. 6 cables.