VER-VCS-8P2-MOB
Veracity Camswitch 8 Mobile
Overview:
Low voltage POE Plus switches for 12/24V applicationsCAMSWITCH Mobile is the ideal solution for installing IP cameras and other POE and network devices in transport, battery/solar powered, and other low-voltage applications. It integrates a 5 or 10 port 10/100 Ethernet switch with the capability to convert a 8 to 40 volt DC supply into an 80 watt IEEE 802.3af/at compliant power source.
CAMSWITCH 4 Mobile features 4 802.3at POE ports, 1 non-POE port, and a versatile DC power input.
CAMSWITCH 8 Mobile features 8 802.3at POE ports, 2 non-POE ports, and a versatile DC power input.
Features:
Network- 5/10 port unmanaged 10/100 switch
- Auto-configuring for speed (10BASE-T or 100BASE-TX) and duplex
- Use with Cat 5, Cat 5e or Cat 6 patch or crossover cables
- VCS-8P2-Mob supports VLAN trunking
- Unit power 3W
- DC input: 8-40V DC, 2.5-13A
- Battery circuit fuse required
- POE outputs: IEEE802.3af / IEEE802.3at compatible
- Total device power budget up to 80 watts (see manual)
- Non-isolated POE, use with IEEE compliant devices only
- W: 110m / 131mm with side clips
- D: 100mm
- H: 40mm
- Weight 290g (VCS-4P1-Mob) / 350g (VCS-8P2-Mob)
Specifications:
| © 2019 Respective owners and brand holders. This table has been carefully researched and generated by Laptop Direct CC (https://www.laptopdirect.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered. | |
Specifications![]() | |
| Product Code | VER-VCS-8P2-MOB![]() |
| Performance | |
| PoE Standard | IEEE 802.3.af/IEEE 802.3at compatible |
| Ports | 8 x Network ports with 802.3at PoE |
| 2 x Data only | |
| 1 x 12/24 VDC Power input | |
| Rate | 10BASE-T or 100BASE-T and duplex, auto-configuring for speed |
| Cable | Straight through or crossover Cat5, Cat5e, or Cat6 patch |
| supports VLAN trunking | |
| Power | |
| Connector | Detachable screw terminal |
| Voltage | 8.5 - 50 V (minimum startup voltage is 10.5 V, supports engine cranking and reduce over-discharge) DC only |
| Fuse Rating | Power Budget: 80 W |
| Fuse Rating (12 V): 10 A | |
| Fuse Rating (24 V): 5 A | |
| Power Budget: 60 W | |
| Fuse Rating (12 V): 7.5 A | |
| Fuse Rating (24 V): 4 A | |
| Power Budget: 40 W | |
| Fuse Rating (12 V): 5 A | |
| Fuse Rating (24 V): 3 A | |
| Power Budget: 20 W | |
| Fuse Rating (12 V): 3 A | |
| Fuse Rating (24 V): 2 A | |
| Power Budget: No PoE | |
| Fuse Rating (12 V): 2 A | |
| Fuse Rating (24 V): 2 A | |
| Power Output | 24 V Input: 80 W total power |
| 12 V Input: 80 W (reduce to 65 W for maximum 86°F (30°C) rise above ambient temperature) | |
| <12 V Input: 60 W (reduce to 50 W if voltage can drop below 10 V) | |
| LED Indicators | Green: PoE ports Constant: PoE enabled |
| Off: No PoE requested | |
| Green: Non-PoE Ports Constant: Power OK | |
| Off: No power | |
| Yellow | |
| Constant: Ethernet OK | |
| Blink: Network activity | |
| Physical | |
| Temperature | 14 to 122°F (-10 to 50°C) |
| Relative Humidity | Up to 85% (non-condensing) |
| Compliance | CE |
| FCC (Part 15) | |
| RoHS | |
| Mounting Holes | 0.1" (5.0 mm) mounting holes on 4.8" (122.0 mm) centers |
| Dimensions (L x W x H) | Without Clips: 4.3 x 3.9 x 1.5" (110.0 x 100.0 x 40.0 mm) |
| Including Clips: 5.1 x 3.9 x 1.5" (131.0 x 100.0 x 40.0 mm) | |
| Weight | 12 oz (350 g) |
| Packaging Info | |
| Package Weight | 1.0 lb |
| Box Dimensions (LxWxH) | 5.6 x 4.4 x 1.7" |

Home page
Contact us
Why buy from us ?
Facebook
Twitter
Price list





