UB-U-LTE-UMR-IND

Ubiquiti UniFi - LTE - Industrial Mobile Router

Ubiquiti UniFi - LTE - Industrial Mobile Router, UMR-Industrial, 2x GbE Ports with 1x PoE Output, LTE category 4 Radio, WiFi 4, 1x PoE Input, 1x PoE Output, Nano-SIM (4FF), Download 150 Mbps / Upload 50 Mbps, 1x GPS antenna with SMA Male connector, 2x Mobile/LTE antennas with SMA Male connectors, 2x WiFi antennas with RP-SMA Male connectors

Overview:

Mobile Router Industrial UMR-Industrial
Compact, ruggedized, and carrier unlocked LTE Cat 4 mobile WiFi router designed for indoor/outdoor IoT applications.

• Site-to-site VPN and VPN client routing
• (2) GbE ports with (1) PoE output
• Powered using PoE, USB Type-C, or 4-pin DC power socket
• Outdoor GPS location tracking
• Flexible wall, pole, and DIN rail mounting
• Weatherproof (outdoor exposed) with the included cover
• Optional Mobility Cloud subscription

_{*PoE+ input required for PoE passthrough.}

Specifications:

© 2024 Respective owners and brand holders. This table has been carefully researched and generated by Laptop Direct CC (https://www.laptopdirect.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.
Specifications
Product Code	UB-U-LTE-UMR-IND
Mechanical
Dimensions	Without antennas and outdoor cover: 114.5 x 93.6 x 32 mm (4.5 x 3.7 x 1.3")
	With antennas: 213 x 93.6 x 32 mm (83 x 3.7 x 1.3")
	With antennas and outdoor cover: 217 x 94 x 32 mm (8.5 x 3.7 x 1.3")
Weight	Device: 360 g (12.7 oz)
	Device with outdoor cover: 395 g (13.9 oz)
	DIN rail/wall mounts: 25 g (0.9 oz)
Enclosure material	Polycarbonate, aluminum
Mount material	Wall/pole mount: polycarbonate
	DIN rail mount: polycarbonate
Pole mount diameter	1-2" on pipe outer diameter
Wind loading	38.8 N at 200 km/h (8.7 lbf at 125 mph)
Weatherproofing	Device with outdoor cover: IP66
Hardware
Management interface	Ethernet
	WiFi
Networking interface	(2) GbE RJ45 ports
	LTE Category 4 radio
	WiFi 4
PoE interface	(1) PoE input
	(1) PoE output* (Max. 10W)
	*Requires a PoE+ switch.
Power supply	UniFi PoE switch (48-54V DC)
	USB Type-C (5V DC)
	4-pin* ATX DC power socket (9-30V DC)
	*Pin 1 for Power + and Pin 2 for Ground -. Please refer to the for detailed power socket pinout.
Max. power consumption	12.5W
SIM	nano-SIM (4FF)
LTE bands	B2, B4, B5, B12, B13, B14, B25, B26, B66, B71
LTE throughput speed	Download 150 Mbps / Upload 50 Mbps
	*Speed depends on network coverage and performance at the device location.
WiFi standards	802.11 b/g/n, WiFi 2.4G, 20/40 MHz
Max. WiFi TX power	22 dBm
WiFi MIMO	2 x 2
GPS	Yes
Antenna SMA ports	(1) Mobile 1: SMA female connector, supports 1Tx and 1Rx
	(1) Mobile 2: SMA female connector, supports 1Rx only
	(1) GPS: SMA female connector
	(2) WiFi: RP-SMA female connectors
	Note: Ensure all SMA / RP-SMA connectors are secured with antennas or the provided caps to maintain weatherproofing.
External antennas	(2) Mobile/LTE antennas with SMA male connectors
	(1) GPS antenna with SMA male connector
	(2) WiFi antennas with RP-SMA male connectors
LED	Status: blue/white
Button	Factory reset
Mounting	DIN rail/wall/pole mount (Included)
Ambient operating temperature	-40 to 70° C (-40 to 158° F)
Ambient operating humidity	5 to 95% noncondensing
Certifications	FCC, IC, PTCRB, GCF, AT&T, T-Mobile, Verizon, Wi-Fi Alliance
Supported WiFi Data Rates
802.11b	1, 2, 5.5, 11 Mbps
802.11g	6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n (WiFi 4)	6.5 Mbps to 300 Mbps (MCS0 - MCS7, HT 20/40)