UB-UF-XG
Ubiquiti UISP - Fiber XG
Overview:
UISP-FIBER-XGAn optical network unit that can deliver 2.5Gbps uplink/10Gbps downlink speeds over distances up to 20 km.
- (1) XG-PON port
- (1) 2.5GbE RJ45 LAN port and 24V PoE in
Specifications:
| © 2023 Respective owners and brand holders. This table has been carefully researched and generated by Laptop Direct CC (https://www.laptopdirect.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered. | |
Specifications![]() | |
| Product Code | UB-UF-XG![]() |
| Mechanical | |
| Dimensions | 100 x 100 x 27 mm (3.9 x 3.9 x 1.1") |
| Weight | 220 g (0.49 lb) |
| Enclosure material | UV-stabilized polycarbonate |
| Hardware | |
| Networking interface | (1) SC/APC, ITU-G.987 XGPON WAN port |
| (1) 100 / 1,000 / 2,500 MbE RJ45 LAN ports | |
| Management interface | Ethernet in-band |
| PON | |
| PoE interface | (1) PoE in, 24V DC passive PoE |
| Memory | 256 MB DDR |
| Onboard flash storage | 32 MB NOR |
| Max. power consumption | 6W |
| Power method | USB-C 5V DC, 3A |
| 24V DC passive PoE | |
| Power supply | 5V DC, 3A power adapter |
| Passive PoE 2-pair (4, 5+, 7, 8-) | |
| Supported voltage range | 5V DC adapter |
| 10-30V DC passive PoE | |
| Total non-blocking line rate | Downstream: 9.95 Gbit/s |
| Upstream: 2.44 Gbit/s | |
| Normal TX range of optical module | 2 to 7dBm |
| Normal RX range of optical module | -9 to -27dBm |
| Button | (1) Factory reset |
| Operating temperature | -15 to 45° C (5 to 113° F) |
| Operating humidity | 10 to 95% non-condensing |
| Certifications | CE, FCC, IC |
| Fiber | |
| Operating wavelength | TX: 1,270nm |
| RX: 1,577nm | |
| Line code | Scrambled NRZ |
| Physical reach | 20 km |
| LEDs | |
| Power | White: ON |
| Ethernet | Steady white: link up |
| Blinking white: activity | |
| OFF: link down | |
| PON status | (3) signal LEDs |
| All-OFF: bootup | |
| 1x orange: signal too low (< -27 dbm) | |
| 1x white: signal low (>= -27 dbm) | |
| 2x white: signal good (>= -24 dbm) | |
| 3x white: signal strong (>= -12 dbm) | |
| 1x orange + 2x white: signal too strong (>= -9 dbm) | |
| 3x orange: no signal | |
| LEDs alternate between orange + white + orange and a signal strength indicator: no authority | |

Home page
Contact us
Why buy from us ?
Facebook
Twitter
Price list






