UB-ETH-SP-GEN2
Ubiquiti Ethernet Surge Protector - Gen 2
Overview:
ESD Protection for Outdoor High-Speed NetworksIntroducing the next generation Ethernet Surge Protector, model ETH-SP-G2, from Ubiquiti Networks. The ETH-SP-G2 is a cost-effective solution for protecting outdoor Ethernet devices from damaging electrostatic discharge and surges. Since all Ubiquiti airMAX devices already have robust ESD protection built in, adding the ETH-SP-G2 to the installation provides an additional layer of protection to the network.
The ETH-SP-G2 is engineered to protect Power-over-Ethernet (PoE) or non-PoE devices with connection speeds of up to 1 Gbps. Two passive, surge-protected RJ45 connections provide maximum equipment compatibility.
Features:
ESD Protection for Outdoor PoE DevicesDamaging electrostatic discharge attacks and surges are diverted to the ETH-SP and safely discharged into the ground, so network devices are protected.
Additional ESD Protection
All Ubiquiti airMAX devices are equipped with built-in ESD protection, so the ETH-SP adds another layer of protection to your outdoor, high-speed network.
Plug and Play Installation
Connect the ground and Ethernet cables in between your network devices.
Specifications:
| © 2026 Respective owners and brand holders. This table has been carefully researched and generated by Laptop Direct CC (https://www.laptopdirect.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered. | |
Specifications and features![]() | |
| Product Code | UB-ETH-SP-GEN2![]() |
| Dimensions | 91 x 61 x 32.5 mm |
| (3.58 x 2.4 x 1.28") | |
| Weight | 80 g |
| (2.82 oz) | |
| Interface Connections | (2) RJ45 Female Connectors |
| ESD/EMP Protection | Absorbing Transient Current with Response to |
| Surge Voltage from 100V/s to 1kV/µs | |
| DC Spark-Over Voltage | 90V @ 100V/s |
| Maximum Impulse Spark-Over Voltage | 700V @ 1kV/µs |
| Discharge Current | 10kA+ |
| Maximum Insulation Resistance | 1G ohm @ 50V |
| Maximum Capacitance | 1.0 pF @ 1 MHz |
| Data Line Protection | RJ45 10/100/1000 Ethernet |
| IEEE 802.3af PoE Support | Yes |
| Shock and Vibration Certification | ETSI300-019-1.4 Standard |
| Operating Temperature | -30 to 65° C |
| (-22 to 149° F) | |
| Operating Humidity | 10 to 90% Noncondensing |

Home page
Contact us
Why buy from us ?
Facebook
Twitter
Price list







