TSW101
Teltonika 5 port Gigabit PoE Switch
Overview:
- TSW101 is Teltonika Networks first automotive-dedicated unmanaged switch.
- Equipped with five Gigabit Ethernet ports, four of which support IEEE802.3af and IEEE802.3at PoE+ standards.
- A wide range of supported power supply voltages (9-30 VDC), and a compact size allow it to slot into many automotive applications.
- Classified as a power source equipment (PSE), this device enables power supply centralization - providing up to 30 watts per single port and maximum output power of 60 watts.
- 10/100/1000 Mbps Ethernet ports for streamlined, high-bandwidth solutions.
- Ideal for providing both: in-vehicle power and an Ethernet data connection simultaneously.
Features:
AUTOMOTIVE SWITCHIdeal for in-vehicle solutions
POE+
4 x PoE+ ports with 802.3af and 802.3at support
Gigabit Ethernet
5 x Gigabit Ethernet ports with speeds of up to 1000 Mbps
INDUSTRIAL DESIGN
Rugged aluminum housing
LOW INPUT VOLTAGE
9-30 V power range for PoE
PLUG-N-PLAY
No configuration needed
Specifications:
| © 2025 Respective owners and brand holders. This table has been carefully researched and generated by Laptop Direct CC (https://www.laptopdirect.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered. | |
Specifications![]() | |
| Product Code | TSW101![]() |
| INTERFACES | |
| Ethernet | 5 x RJ45 ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover |
| POE | |
| PoE ports | Port 1- 4 |
| PoE standards | 802.3af and 802.3at |
| PoE Max Power per Port (at PSE) | 30 W |
| Total PoE Power Budget (at PSE) | 60 W |
| Maximum Ethernet cable length | 100 m |
| PERFORMANCE SPECIFICATIONS | |
| Bandwidth (Non-blocking) | 10 Gbps |
| Packet buffer | 128 KB |
| MAC address table size | 2K entries |
| Jumbo frame support | 9216 bytes |
| POWER | |
| Connector | 2-pin industrial DC power socket |
| Input voltage range | 9-30 VDC |
| Input voltage range for PoE | 9-30 VDC |
| Power consumption | Idle: 0.64 W / Max: 2.31 W / PoE Max: 60 W |
| PHYSICAL INTERFACES (PORTS, LEDS) | |
| Ethernet | 5 x RJ45 ports, 10/100/1000 Mbps |
| Status LED's | 1 x Power LED, 10 x LAN status LED's |
| Power | 1 x 2-pin industrial DC power socket |
| Ground | 1 x Grounding screw |
| PHYSICAL SPECIFICATION | |
| Casing material | Aluminum housing |
| Dimensions (W x H x D) | 115 x 32 x 95 mm |
| Weight | 354 g |
| Mounting | DIN rail or wall mounting (additional kit needed), flat surface placement |
| OPERATING ENVIRONMENT | |
| Operating temperature | -40 °C to +75 °C |
| Operating humidity | 10 % to 90 % non condensing |
| Ingress Protection Rating | IP30 |
| CERTIFICATION & APPROVALS | |
| Regulatory | CE, REACH, RoHS, WEEE |
| TSW101 CE | |
| TSW101 UKCA | |
| TSW101 FCC | |
| TSW101 IC | |
| TSW101 CB | |
| TSW101 RCM | |
| E-Mark | |
| SAFETY | |
| Standards | EN IEC 62368-1:2020+A11:2020 |

Home page
Contact us
Why buy from us ?
Facebook
Twitter
Price list






