P106GC
Netis P106GC 6 Port Gigabit PoE Switch
Overview:
4GE POE+1GE +1GE SFP Uplink POE SwitchNetis 4GE POE+1GE +1GE SFP Uplink POE Switch P106GC provides a great selection for expanding your home, store or office network. It fully complies with IEEE802.3/802.3u/802.3ab/802.3z Ethernet standards. It provides 4 Gigabit POE RJ45 Ports and 1 Gigabit uplink RJ45 port and 1 Gigabit SFP uplink port. All POE RJ45 ports support Power over Ethernet function and it can automatically detect and supply power with the IEEE 802.3at/af compliant Powered Devices (PDs). With the AI designed, P106GC will recover unresponsive POE devices automatically, QoS, VLAN will provide more smooth network and better using experience.
Features:
- 10* 10/100/1000Mbps Auto-Negotiation RJ45 ports,8 PoE function
- Supports PoE power up to 30W for each PoE port,68W for all PoE ports
- Supports PoE IEEE 802. 3at/af compliant Powered Device (PD)
- IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode
- 20Gbps switching fabric capacity/backplane bandwidth
- Supports 2K MAC address table, MAC address auto-learning & auto-aging
- A utomatically detect and reboot unresponsive POE devices
- SupportQoS, more smooth for video monitoring transmission
- Support LAN ports isolation
- Steel case, with external power supply
Specifications:
| © 2023 Respective owners and brand holders. This table has been carefully researched and generated by Laptop Direct CC (https://www.laptopdirect.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered. | |
Specifications![]() | |
| Product Code | P106GC![]() |
| Hardware | |
| Interface | 4*10/100/1000M POE ports (Data /Power) |
| 1*10/100/1000M uplink RJ45 port (Data) | |
| 1*10/100/1000M SFP port | |
| Basic function | Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol |
| Supports POE IEEE 802. 3af/at compliant Powered Device (PD) | |
| Store-and-forward switching scheme | |
| Support IEEE802.3X full duplex and Backpressure half duplex | |
| MAC address auto-learning & auto-aging | |
| Standards | IEEE 802.3 10BASE-T Ethernet |
| IEEE 802.3i 10BASE-T Ethernet | |
| IEEE 802.3u 100BASE-TX Fast Ethernet | |
| IEEE 802.3ab 1000BASE-T Gigabit Ethernet | |
| IEEE 802.3af/at, Power over Ethernet | |
| IEEE 802.3x Flow Control | |
| Mode | Normal switch mode |
| Data Transfer Rate | Ethernet : 10Mbps(Half-duplex), 20Mbps(Full-duplex) |
| Fast Ethernet :100Mbps(Half-duplex), 200Mbps(Full-duplex) | |
| Gigabit Ethernet :2000Mbps(Full-duplex) | |
| QoS | Yes |
| VLAN | Yes |
| Switching Capacity | 12G |
| MAC Address Table Size | 2K |
| Jumbo Frame | 2048 byte |
| Environment | Operation Temperature : 0°C~40°C |
| Storage Temperature : -40°C~70°C | |
| Operation Humidity : 10%~90% RH Non-condensing | |
| Storage Humidity : 5%~90% RH Non-condensing | |
| Power Input POE Standards | Single port maximum power 30W, whole switch maximum power 68W |
| Supporting over-current, over-voltage and short-circuit protection | |
| Supporting Soft Start of High Power PD | |
| Support sequential boot-up | |
| Power Supply Pin:12+/36- | |
| AC 110~240V 50/60HZ | |
| Cabling type | 1000Base-TX: Cat 5e or better UTP/STP(≤100m) |
| 100Base-TX: Cat 5e or better UTP/STP(≤100m) | |
| 10Base-TX: Cat 5e or better UTP/STP(≤100m) | |
| Dimensions (L x W x H ) | 124mm*115mm*33mm |

Home page
Contact us
Why buy from us ?
Facebook
Twitter
Price list





