The contents of this page may be found at https://www.laptopdirect.co.za. The contents are copyright. Although every effort has been made to ensure the accuracy of information, no reliance may be placed on the accuracy of the contents or any price found on this site. Any and all information should be used for reference purposes only. This site is neither owned nor operated by Microworld™©, but it is offered as an extension to laptopdirect.co.za as a reseller service to the public. We hold no claim whatsoever to the brand/s, logo/s or any other property or rights owned by Microworld™©. The information and pricing may have been valid prior to this page being captured, however, a print is not a valid advertisement for pricing nor specifications, and only products that have been sent by quote are valid. Prices are subject to change without prior notice. T&C's apply.

SATA2M2

Microworld SATA to M2 NGFF convertor

Microworld - Microworld SATA to M2 NGFF convertor; SATA Revision 3.2; Up to 6 Gbps; M.2 NGFF B key; mSATA interface; Mini PCI-e 52 pin; Maximum current: 3A; Green power LED; Red activity LED; Dimensions: 98 x 65.5 mm; Short circuit, surge and HBM 2KV protection
BUY TODAY ! Expected to be in Stock at suppliers.* print


Not rated yet



Rate this product

Specials
Prices, images and descriptions are for reference purposes only & may change without prior notice. PLEASE RELY ON ABOVE DESCRIPTIONS AND NOT ON IMAGES. SATA2M2 Microworld SATA to M2 NGFF convertor is available from Laptop Direct and it is sold as new from our Drive accessories / peripherals range of products. For reference purposes, the price of R198 is valid 2026-10-23, and while stocks last, may be valid until . The price displayed is a guide for reference purposes only, and may change without prior notice. Reference prices are an invitation for potential buyers to make an offer to purchase, which we may reject without reason. A quote with final pricing is sent before a purchase can be made. T&C's apply. E&OE. Laptop Direct. You are looking at products found in the Drive accessories / peripherals category.
Subscribe

Specification for the entire series

Important information: Kindly note that specifications differ between models. Features, options and accessories displayed below this paragraph are not included with this product unless it has been specified in the above description.


Please remember these important points when reading the information below this paragraph: Operating systems cannot be removed or changed, monitors are not included with computers, free Anti-virus and Office Software are trial versions or may have limited features and an additional license needs to be purchased to activate the full product.

SATA2M2

Microworld SATA to M2 NGFF convertor

Microworld SATA to M2 NGFF convertor; SATA Revision 3.2; Up to 6 Gbps; M.2 NGFF B key; mSATA interface; Mini PCI-e 52 pin; Maximum current: 3A; Green power LED; Red activity LED; Dimensions: 98 x 65.5 mm; Short circuit, surge and HBM 2KV protection

About this product

The Microworld SATA2M2 SATA to M2 NGFF converter lets you install a compatible M.2 NGFF SSD through a SATA III connection in a compact 2.5 inch style enclosure. It supports SATA Revision 3.2, M.2 NGFF B key drives and data transfer speeds of up to 6 Gbps. Buy now from our website for a practical M.2 SATA storage conversion solution.

Overview Summary

Microworld SATA2M2 SATA to M2 NGFF Converter is designed to connect a compatible M.2 NGFF SSD to a SATA III interface. The adapter uses an M.2 NGFF B key connector and supports SATA Revision 3.2, providing a convenient way to use compatible M.2 storage through a SATA connection.

The converter has a 2.5 inch SATA SSD shell appearance and includes LED indicators for power and SSD activity. It also provides short circuit protection, instantaneous surge current protection and electrostatic protection. The design supports a maximum current of 3 amps.

What tier does this fall into?

SATA III storage adapter

What is this best for?

M.2 NGFF SSD installation, SATA storage upgrades, desktop storage conversion, compatible M.2 SSD connectivity

Description

The Microworld SATA2M2 is a SATA to M2 NGFF converter designed to allow a compatible M.2 NGFF SSD to be connected through a SATA III interface. It is intended for users who need to integrate compatible M.2 storage into a system or enclosure that provides a SATA connection.

The adapter uses an M.2 NGFF B key interface and supports SATA Revision 3.2. The published maximum data transfer capability is up to 6 Gbps when used with a compatible SATA III controller and storage device. Actual storage performance depends on the connected SSD and host system.

The SATA2M2 has a 2.5 inch SATA SSD shell appearance with a stated size of 98 x 65.5 mm. Green and red LED indicators provide visual information for SSD power and activity. The adapter also incorporates a PWM synchronous buck converter power IC and provides a maximum current of 3 amps.

The converter includes short circuit protection, instantaneous surge current protection and electrostatic protection rated at HBM 2KV. It also has both M.2 NGFF and mSATA interfaces. When M.2 and mSATA SSDs are installed at the same time, the M.2 SSD is detected first and the mSATA SSD does not operate.

Features

The Microworld SATA2M2 provides a practical storage conversion option for compatible M.2 NGFF and SATA based systems.

  • SATA to M.2 NGFF conversion
  • Supports SATA Revision 3.2
  • Compatible with PCI Express M.2 Specification Version 1.0
  • M.2 NGFF B key connector
  • Supports data transfer speeds up to 6 Gbps through SATA III
  • 2.5 inch SATA SSD shell appearance
  • Stated dimensions of 98 x 65.5 mm
  • Mini PCI-e 52 pin connector
  • M.2 NGFF and mSATA interface support
  • Green LED indicates SSD power status
  • Red LED indicates SSD activity
  • PWM synchronous buck converter power IC
  • Maximum current of 3 amps
  • Short circuit protection
  • Instantaneous surge current protection
  • Electrostatic protection HBM 2KV
  • When M.2 and mSATA SSDs are installed simultaneously, the M.2 SSD is detected first and the mSATA SSD does not operate

Whats in the Box

  • Microworld SATA2M2 SATA to M2 NGFF converter

Specifications

  • Brand: Microworld
  • Model: SATA2M2
  • Product type: SATA to M2 NGFF converter
  • SATA standard: SATA Revision 3.2
  • Maximum transfer speed: Up to 6 Gbps
  • M.2 compatibility: PCI Express M.2 Specification Version 1.0
  • M.2 interface: M.2 NGFF B key
  • Additional interface: mSATA
  • Connector: Mini PCI-e 52 pin
  • Maximum current: 3 amps
  • Power indicator: Green LED
  • Activity indicator: Red LED
  • Power circuit: PWM synchronous buck converter power IC
  • Protection: Short circuit protection
  • Surge protection: Instantaneous surge current protection
  • Electrostatic protection: HBM 2KV
  • Shell appearance: 2.5 inch SATA SSD style
  • Dimensions: 98 x 65.5 mm
  • Simultaneous M.2 and mSATA operation: M.2 SSD is detected first and mSATA SSD does not operate

FAQ

What is the Microworld SATA2M2 used for?

The Microworld SATA2M2 is used to connect a compatible M.2 NGFF SSD to a SATA III interface.

Does the SATA2M2 support SATA III?

Yes. The SATA2M2 supports SATA Revision 3.2 and published transfer capability of up to 6 Gbps.

Which M.2 SSD key does the SATA2M2 support?

The converter provides an M.2 NGFF B key interface. Check the SSD connector type before installation.

Does the SATA2M2 support mSATA SSDs?

Yes. The product includes an mSATA interface. When an M.2 SSD and mSATA SSD are installed at the same time, the M.2 SSD is detected first and the mSATA SSD does not operate.

What are the dimensions of the SATA2M2?

The published product dimensions are 98 x 65.5 mm.

Does the SATA2M2 have LED indicators?

Yes. A green LED indicates SSD power status and a red LED indicates SSD activity.

What protection does the SATA2M2 provide?

The converter provides short circuit protection, instantaneous surge current protection and HBM 2KV electrostatic protection.

What is the maximum current supported by the SATA2M2?

The published maximum current is 3 amps.

Is the SATA2M2 suitable for an M.2 NVMe SSD?

The published specifications identify the product as an M.2 NGFF B key SATA based converter. They do not specify NVMe support, so it should not be treated as an NVMe adapter.



© Respective owners and brand holders. © 2026 Laptop Direct CC. The contents has been generated by Laptop Direct CC (https://www.laptopdirect.co.za). All products are sourced locally in South Africa and the warranty is that of the local supplier only. E&OE.

Reviews SATA2M2 Microworld SATA to M2 NGFF convertor

Review
Do you have an opinion about this product? [+] Add your review

This product has not been rated yet.

Power in a box for loadshedding