The contents of this page may be found at https://www.laptopdirect.co.za. The contents are copyright. Although every effort has been made to ensure the accuracy of information, no reliance may be placed on the accuracy of the contents or any price found on this site. Any and all information should be used for reference purposes only. This site is neither owned nor operated by Creality™©, but it is offered as an extension to laptopdirect.co.za as a reseller service to the public. We hold no claim whatsoever to the brand/s, logo/s or any other property or rights owned by Creality™©. The information and pricing may have been valid prior to this page being captured, however, a print is not a valid advertisement for pricing nor specifications, and only products that have been sent by quote are valid. Prices are subject to change without prior notice. T&C's apply.

3301010606

Creality Soleyin Ultra PLA Gray 1kg Filiment

Creality - Creality Soleyin Ultra PLA; Gray; PLA; 1.75mm filament; 1kg spool; 30-300mm/s printing speed; 190-230 C printing temperature; 45-60 C heated bed; 1.25 g/cm3 density; 21 x 21 x 7 cm packaging
BUY TODAY ! Expected to be in Stock at suppliers.* print


Not rated yet



Rate this product

Specials
Prices, images and descriptions are for reference purposes only & may change without prior notice. PLEASE RELY ON ABOVE DESCRIPTIONS AND NOT ON IMAGES. 3301010606 Creality Soleyin Ultra PLA Gray 1kg Filiment is available from Laptop Direct and it is sold as new from our 3D Printer filament & accessories range of products. For reference purposes, the price of R304 is valid 2026-10-10, and while stocks last, may be valid until . The price displayed is a guide for reference purposes only, and may change without prior notice. Reference prices are an invitation for potential buyers to make an offer to purchase, which we may reject without reason. A quote with final pricing is sent before a purchase can be made. T&C's apply. E&OE. Laptop Direct. You are looking at products found in the 3D Printer filament & accessories category.
Subscribe

Specification for the entire series

Important information: Kindly note that specifications differ between models. Features, options and accessories displayed below this paragraph are not included with this product unless it has been specified in the above description.


Please remember these important points when reading the information below this paragraph: Operating systems cannot be removed or changed, monitors are not included with computers, free Anti-virus and Office Software are trial versions or may have limited features and an additional license needs to be purchased to activate the full product.

3301010606

Creality Soleyin Ultra PLA Gray 1kg Filiment

Creality Soleyin Ultra PLA; Gray; PLA; 1.75mm filament; 1kg spool; 30-300mm/s printing speed; 190-230 C printing temperature; 45-60 C heated bed; 1.25 g/cm3 density; 21 x 21 x 7 cm packaging

About this product

The Creality Soleyin Ultra PLA Gray 1kg is a high-speed 3D printing filament designed for reliable FDM printing, consistent extrusion and strong layer adhesion. With a 1.75mm filament diameter, 30-300mm/s printing range and recommended printing temperature of 190-230 C, it is suitable for detailed models, prototypes, functional parts and everyday 3D printing. Buy this Creality Soleyin Ultra PLA filament from our website for a dependable material solution for your 3D printer.

Overview Summary

Creality Soleyin Ultra PLA Gray 1kg is a high-speed PLA filament developed for FDM and FFF 3D printing. The 1.75mm filament diameter supports consistent material feeding and extrusion, while the gray colour provides a practical finish for models, prototypes, functional components and general-purpose prints.

Soleyin Ultra PLA supports printing speeds from 30-300mm/s and has a recommended nozzle temperature range of 190-230 C. Its strong adhesion characteristics help minimise shrinkage and curling, while the recommended 100% cooling fan speed supports reliable printing and clean model detail.

What tier does this fall into?

High-speed PLA filament

What is this best for?

3D models, prototypes, functional parts, educational projects, hobby printing, general FDM printing

Description

The Creality Soleyin Ultra PLA Gray 1kg is a PLA filament designed for high-speed FDM and FFF 3D printing. It is supplied as a 1kg spool with a 1.75mm filament diameter and is suitable for a wide range of everyday 3D printing applications.

The filament is designed for printing speeds between 30 and 300mm/s, giving compatible printers the flexibility to operate at standard or high-speed settings. The recommended printing temperature is 190-230 C, with a heated bed temperature of 45-60 C.

Soleyin Ultra PLA is produced using renewable plant resources such as corn and potatoes. Creality states that its strong adhesion helps minimise shrinkage and curling, supporting a higher printing success rate. The filament also supports a recommended cooling fan speed of 100%.

With a tensile strength of 45.482 MPa, flexural strength of 70.696 MPa and elongation at break of 12.897% in the X-Y direction, this filament is suitable for producing a variety of models and components. The gray finish provides a neutral appearance suitable for prototypes, practical parts and decorative prints.

Features

Creality Soleyin Ultra PLA combines high-speed printing capability with consistent filament dimensions and strong adhesion for dependable FDM printing.

  • 1kg spool of Creality Soleyin Ultra PLA
  • Gray filament colour
  • 1.75mm filament diameter
  • Supports printing speeds from 30-300mm/s
  • Recommended printing temperature of 190-230 C
  • Recommended heated bed temperature of 45-60 C
  • Recommended cooling fan speed of 100%
  • Strong adhesion helps minimise shrinkage and curling
  • Density of 1.25 g/cm3
  • Tensile strength of 45.482 MPa in the X-Y direction
  • Flexural strength of 70.696 MPa in the X-Y direction
  • Elongation at break of 12.897% in the X-Y direction
  • Suitable for models, prototypes, functional parts and general 3D printing
  • Made using renewable plant resources such as corn and potatoes
  • Compatible with printing platforms including carbon crystalline silicon and PEI platform boards

What's in the Box

  • 1 x Creality Soleyin Ultra PLA Gray filament spool
  • 1 x 1kg filament spool

Specifications

  • Brand: Creality
  • Product series: Soleyin Ultra PLA
  • Product code: 3301010606
  • Material: PLA
  • Colour: Gray
  • Filament diameter: 1.75mm
  • Net weight: 1kg
  • Gross weight: 1.29kg
  • Density: 1.25 g/cm3
  • Tensile strength: 45.482 MPa X-Y
  • Flexural strength: 70.696 MPa X-Y
  • Elongation at break: 12.897% X-Y
  • Printing temperature: 190-230 C
  • Heated bed temperature: 45-60 C
  • Printing speed: 30-300mm/s
  • Recommended fan speed: 100%
  • Recommended printing platforms: Carbon crystalline silicon, PEI platform board
  • Packaging dimensions: 21 x 21 x 7 cm
  • Packaging weight: 1.29kg

FAQ

What is the Creality Soleyin Ultra PLA Gray 1kg?

The Creality Soleyin Ultra PLA Gray 1kg is a 1.75mm PLA filament designed for FDM and FFF 3D printing. It is supplied as a 1kg spool and is intended for models, prototypes, functional parts and general printing.

What temperature should Creality Soleyin Ultra PLA be printed at?

The recommended printing temperature is 190-230 C. The recommended heated bed temperature is 45-60 C.

What printing speed does Soleyin Ultra PLA support?

Creality specifies a printing speed range of 30-300mm/s for Soleyin Ultra PLA.

What filament diameter is used by Creality Soleyin Ultra PLA?

The filament has a diameter of 1.75mm.

How much filament is included?

The spool contains 1kg of net filament.

What colour is this Soleyin Ultra PLA filament?

This product is the Gray colour variant of Creality Soleyin Ultra PLA.

What is Creality Soleyin Ultra PLA suitable for?

It is suitable for 3D models, prototypes, functional parts, educational projects, hobby printing and general FDM 3D printing applications.

Which printing platforms are recommended for Soleyin Ultra PLA?

Creality lists carbon crystalline silicon and PEI platform boards as recommended printing platforms.

Is Creality Soleyin Ultra PLA designed for high-speed printing?

Yes. Creality specifies a printing speed range of 30-300mm/s and describes Soleyin Ultra PLA as a 300mm/s high-speed PLA filament.



© Respective owners and brand holders. © 2026 Laptop Direct CC. The contents has been generated by Laptop Direct CC (https://www.laptopdirect.co.za). All products are sourced locally in South Africa and the warranty is that of the local supplier only. E&OE.

Reviews 3301010606 Creality Soleyin Ultra PLA Gray 1kg Filiment

Review
Do you have an opinion about this product? [+] Add your review

This product has not been rated yet.

Power in a box for loadshedding