Arctic Accelero L2 PLUS VGA Cooler
Arctic Accelero L2 PLUS VGA Cooler for NVIDIA and AMD Radeon
The Accelero L2 PLUS is a cross compatible VGA cooler designed for low end to mid-range graphic cards, same as his predecessor L2 Pro but with a wider compatibility and enhanced RAM and VR cooling. A comprehensive RAM/VR cooling set is also included to improve the cooling performance of RAM/VR.
Featuring a 92 mm PWM fan and a cooling capacity of 120 Watts, the Accelero L2 PLUS ensures components are performing under ideal temperature. The pre-applied MX-4 thermal compound allows enhanced thermal conductivity from the GPU, thus considerably extending its service life.
To accommodate a broad range of models, the Accelero L2 PLUS comes with a versatile mounting mechanism and an extensive RAM and VR cooling set consisting of 16 pieces of RAM/VR heatsinks in various sizes. Featuring the CrossFire and SLI compatibility the users benefit from the optimized performance of a multi-VGA setup.
Operated by a low noise impeller enclosed in a patented fan holder to reduce the buzzing sound when the fan is spinning, the Accelero L2 PLUS is barely audible even running at full load. To enable minimum noise level at all circumstances, the PWM controller enables the fan to run at the optimal speed according to the load generated by the GPU.
|© 2013 Respective owners and brand holders. This table has been carefully researched and generated by Laptop Direct CC (https://www.laptopdirect.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered.|
|Max. Cooling Capacity||120 Watts|
|Fan (mm)||92 mm, 900 - 2, 000 RPM (controlled by PWM)|
|Bearing||Fluid Dynamic Bearing|
|Noise Level||0.4 Sone|
|Current / Voltage||0.16A/ 12V|
|Product Dimensions (L x W x H)||119 (L) x 94 (W) x 51 (H) mm|
|Net Weight||250 g|
|Screw (M2)||4 pcs|
|Spacer (4 mm)||4 pcs|
|Insulation Tape||1 pc|
|Thermal Adhesives (3 g)||1 tube|
|Mixing Wand||1 pc|
|4-Pin Fan Power Adapter||1 pc|
|Packaging Dimensions (L x W x H)||123 (L) x 98 (W) x 55 (H) mm|
|Gross Weight||0.55 kg|
, ©2013 Laptop Direct CC