The Anycubic PLA Matte Filament in Black is engineered for creators who demand a professional-grade finish without the hassle of post-processing. Its unique matte texture effectively masks layer lines, resulting in a smooth, uniform surface that elevates decorative models, display pieces, and artistic sculptures. This filament ensures clean support removal directly off the build plate, eliminating the need for sanding or extensive finishing work. With factory-tuned parameters pre-configured, users can achieve consistent results immediately upon loading the spool, making it an ideal choice for both hobbyists and professionals seeking reliable aesthetic prints.
This premium 1kg spool of Anycubic PLA Matte Filament (Part Number: AHYGBK-10 ) delivers a sophisticated matte black finish that conceals printing artifacts. It is designed for seamless integration with 1.75 mm FDM printers and includes an intelligent identification chip for enhanced compatibility with the ACE Pro system. The reusable spool features a threaded locking mechanism to prevent entanglement, ensuring smooth feeding during long print jobs.
Key Benefits
Printers benefit from a material that combines aesthetic appeal with practical performance. The fine matte texture provides an elegant look for figurines and art pieces while the optimized composition allows supports to peel away cleanly. Users appreciate the pre-configured settings which reduce setup time, allowing them to focus on creativity rather than calibration.
The material is optimized to run at a printing temperature between 190 and 230 degrees Celsius with a heated bed setting of 60 to 65 degrees. Recommended printing speeds range from 50 to 250 mm/s, allowing for flexibility in both speed and quality depending on the project requirements.
Understanding the physical properties of this filament helps users select the right material for their specific needs. The matte black color code is #484A49 . For best results, it is recommended to dry the filament before use at 55-65 degrees Celsius for 6 to 8 hours.
This filament is categorized as an aesthetic material, making it highly recommended for printing decorative parts, fandom items, artworks, and anime figurines. It supports intelligent identification features and comes on a reusable spool designed to maintain quality throughout the print.
What's in the Box
The product identifier AHYGBK-10 ensures you receive the correct Anycubic matte filament variant for your printing needs.
| © 2026 Respective owners and brand holders. This table has been carefully researched and generated by Laptop Direct CC (https://www.laptopdirect.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered. | |
Specifications | |
| Product Code | AHYGBK-10 |
| Colour | Matte Black (#484A49) |
| Dry Out Before Use | Recommended |
| Drying Condition | 55-65degreesC, 6-8h |
| ACE Compatibility | Compatible |
| Nozzle Size | Recommended 0.2 mm or above |
| Printing Temperature | 190-230 degreesC |
| Heated Bed Temperature | 60-65 degreesC |
| Recommended Printing Speed | 50-250 mm/s |
| Cooling Time | 8 s |
| Maximum Volume Speed (Flow Rate) | 12 mm³/s |
| Density | 1.25 g/cm³ |
| Melt Index | 8±3 g/10 min (190degreesC/2.16kg) |
| Melting Point Temperature | 163 degreesC |
| Vicat Softening Temperature | 57 degreesC |
| Heat Deflection Temperature (0.45MPa) | 54 degreesC |
| Young's Modulus | 2600±150 MPa |
| Tensile Strength | 38±2 MPa |
| Elongation at Break | 13±4% |
| Bending Modulus | 3200±100 MPa |
| Bending Strength | 67±2 MPa |
| lzod lmpact Strength (X-Y) | 19±1 kJ/m² |
| Tensile Strength (Z) | 12±2 MPa |
| Filament Type | Aesthetic filaments |
| Recommend to Print | Decorative parts, fandom, artworks, anime figurines |
| Intelligent Identification | Supported |
| Reusable Filament Spool | Supported |
| Size | 1KG |
Is this filament suitable for printing detailed figurines or artworks?
Anycubic PLA Matte Filament is ideal for decorative parts, fandom items, and anime figurines because its fine matte texture naturally hides layer lines for a polished surface finish.
Do I need to calibrate settings before using this filament?
No, the filament ships with pre-configured factory-tuned parameters so you can load it and print with confidence without tedious calibration required.
What are the recommended printing temperatures for this material?
The Anycubic PLA Matte Filament requires a printing temperature between 190-230 degrees C and a heated bed temperature of 60-65 degrees C for best results.
Will this filament work with my 3D printer if I have a small nozzle?
This filament is compatible with all 1.75 mm FDM printers using a 0.2 mm nozzle or larger, making it versatile for various print resolutions.
How should I store the filament to ensure optimal quality?
Drying out before use is recommended; place the filament in an environment of 55-65 degrees C for 6-8 hours if it has been exposed to moisture.
©2026 Laptop Direct CC
E&OE Errors may occur and information is for reference purposes only and are subject to change without notice.
Images are for reference only. You may not copy, duplicate, reproduce the contents of this page or any other page for use in any e-commerce site or pricelists.
You may share this page, print and use sections of the text for reference purposes on condition that there is a clear and explicit credit to this site, ie: "https://www.LaptopDirect.co.za" must appear as a referal at all times.
