Ubiquiti UniFi G2 Access Starter Kit UA-G2-SK
Take control of your building security with the Ubiquiti UniFi G2 Access Starter Kit. Designed for easy setup, this kit provides everything you need to secure a single door while integrating seamlessly with the UniFi ecosystem.
This starter kit includes a UniFi Access Door Hub, a G2 Access Reader, and 10 UniFi Access Cards, giving you a complete, ready-to-use access control solution. Ideal for offices, small businesses, or any location needing reliable, secure entry management.
Complete Door Access Solution
The UA-G2-SK kit allows you to manage access with simplicity and efficiency. The included UniFi Access Door Hub connects your access reader to your network, while the G2 Access Reader supports card-based entry for fast and secure door control.
Included Components
Easy Installation and Integration
Setup is straightforward, with all components designed to work seamlessly together. The kit integrates with your existing UniFi ecosystem, allowing for centralized management and real-time monitoring of access points.
Secure and Reliable Access Management
With the UniFi G2 Access system, you get robust security and reliable performance. The access cards are durable and easy to distribute, giving authorized personnel convenient entry without compromising security.
Why Choose the UA-G2-SK Starter Kit
| © 2025 Respective owners and brand holders. This table has been carefully researched and generated by Laptop Direct CC (https://www.laptopdirect.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered. | |
Specifications | |
| Product Code | UA-G2-SK-EU |
| UA-Hub-Door | |
| Mechanical | |
| Dimensions | 174.9 x 126 x 32.9 mm (6.9 x 5 x 1.3") |
| Weight | 363 g (12.8 oz) |
| Enclosure material | Polycarbonate |
| Mounting material | Polycarbonate |
| Hardware | |
| Networking interface | (5) 10/100/1000 Base-T |
| Power method | PoE++ |
| UL 294 Power-limited Class 2 PSU | |
| UL 60950/62368 LPS/PS2 PSU | |
| Max. power consumption | Without PoE output: 30W |
| With PoE output: 50W | |
| PoE input | 50V DC, 1A |
| PoE output | PoE passthrough, (4) PoE, 50V DC, total 20W |
| Button | (1) Factory-reset |
| LEDs | System: white/blue |
| Output relays: white | |
| Digital input | Request to exit/request to enter/remote release/door position sensor |
| Dry output relay | Lock: 30V DC, 1A |
| Aux: 30V DC, 1A | |
| Powered output relay | Lock: 12V DC, 1A |
| Aux: 12V DC, 0.33A | |
| 12V DC, 0.33A | |
| Operating environment | Indoor use only |
| Operating temperature | 0 to 40degrees C (32 to 104degrees F) |
| Operating humidity | 5 to 95% noncondensing |
| UL 294 level | Destructive attack: Level I |
| Line security: Level I | |
| Endurance: Level I | |
| Standby power: Level I | |
| UL 294 statement | Compliance with IEEE 802.3 (at or af) specifications was not verified as part of UL 294. |
| The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. | |
| CAN/ULC-60839-11-1 Grade | Grade assignment: 1 |
| Certifications | CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 |
| Document number, and issue date and/or revision level | UA-Hub-Door002, V01 |
| LEDs | |
| PoE in | Steady blue: Adopted/device is ready |
| Steady white: Pending adoption | |
| Blinking white/blue: Upgrading firmware | |
| PoE out | Off: Not connected or no data link |
| Steady blue: Connected and data link on | |
| UA-G2 | |
| Mechanical | |
| Dimensions | 93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4") |
| Weight | 82 g (2.9 oz) |
| Enclosure material | Polycarbonate, glass |
| Mounting | In wall, gang box |
| Weatherproofing | IP55 |
| Hardware | |
| Networking interface | (1) 10/100 MbE RJ45 port |
| Connectivity | BLE 4.1 |
| Power method | PoE |
| Supported voltage range | 48V DC |
| Max. power consumption | 5W |
| ESD/EMP protection | Air: ±15kV, contact: ±8kV |
| Sensors | Proximity sensor |
| Speaker | (1) 8 ohm, 0.7W |
| LEDs | R/G/B/W |
| Button | (1) Factory-reset |
| NFC frequency | 13.56 MHz |
| NFC read range | < 30 mm |
| NFC standards | ISO 14443A, 14443B, 15693 |
| NFC technology | NFC Tag 1,2,3,4,5 |
| MIFARE Classic | |
| MIFAREPlus | |
| MIFARE Ultralight | |
| MIFARE DESFire | |
| Operating temperature | -30 to 45degrees C (-22 to 113degrees F) |
| Operating humidity | 5 to 90% noncondensing |
| Certifications | CE, FCC, IC |
| UA-Card | |
| Mechanical | |
| Dimensions | 85.6 x 53.98 x 0.84 mm (3.37 x 2.13 x 0.03") |
| Weight | 5 g (0.18 oz) |
| Format | ISO 7810 ID-1 |
| NFC frequency | 13.56 MHz |
| NFC technology | ISO/IEC 14443 Type A |
| MIFARE DESFire | |
| UniFi Access Proprietary Security Protocol | |
©2026 Laptop Direct CC
E&OE Errors may occur and information is for reference purposes only and are subject to change without notice.
Images are for reference only. You may not copy, duplicate, reproduce the contents of this page or any other page for use in any e-commerce site or pricelists.
You may share this page, print and use sections of the text for reference purposes on condition that there is a clear and explicit credit to this site, ie: "https://www.LaptopDirect.co.za" must appear as a referal at all times.
