Trendnet Hardened Industrial 100/1000Base-T to SFP Media Converter
Short Description
TRENDnet TI-F11SFP hardened Industrial 100/1000base-t to SFP Media converter, 1x Gigabit Port, 1x Gigabit SFP slot, 4 pin removable Terminal block, DIP Switch, DIN-Rail Mount, Alarm relay, IP30 metal case
© Respective owners and brand holders. © 2026 Laptop Direct CC. The contents has been generated by Laptop Direct CC (https://www.laptopdirect.co.za). All products are sourced locally in South Africa and the warranty is that of the local supplier only. E&OE.
Long Description
The specifications displayed below are for the entire series of products and may not apply to this product or model, please refer to the above description for the correct details of this model.
Overview:
Hardened Industrial 100/1000Base-T to SFP Media Converter - TI-F11SFP (Version v2.0R)
- Hardened IP30 rated 100/1000Base-T Ethernet to SFP converter
- SFP port accommodates Multi or Single Mode fiber modules
- Up to 80km fiber networking distances with the TEG-MGBS80 SFP module
- Operating temperature range of -40º - 75º C (-40º - 167º F)
- 12 - 56V DC power input with overload current protection
- Includes DIN-Rail and wall mounts
- Powers supply sold separately (model TI-M6024)
Features:
TRENDnet's TI-F11SFP is a reliable IP30 rated 100/1000Base-T to SFP media converter with hardened components rated for extreme industrial environments. Set 100Mbps or 1000Mbps throughput speeds, Auto Negotiation, and Link Fault Pass Through (LFP) using the front panel dip switches. 12 - 56V DC power input with overload current protection. (power supply sold separately: TI-M6024).
Industrial Applications
Networks devices for manufacturing, general industrial, warehousing, surveillance, and corporate applications.
Alarm Relay
12 - 56V DC power input with overload current protection.
Industrial Hardened Design
Designed with a rugged IP30 rated housing, resistance to a high degree of vibration and shock, protection against ESD/EMI/surge, and operates within a wide operation temperature range (-45° - 75° C (-40°a - 167° F)).
Network Ports
1 x Gigabit Ethernet port and 1 x SFP slot
Dip Switches
1: Turns LFP (Link Fault Pass Through) on/off
2: Set SFP speed to 100Mbps or 1000Mbps
DIN-Rail/Wall Mounts
IP30 rated metal enclosure with included DIN-rail and wall mount hardware
Switching Capacity
2Gbps switching capacity
Alarm Relay
12 - 56V DC power input with overload current protection (power supply sold separately: model TI-M6024)
Jumbo Frame
Sends larger packets, or Jumbo Frames (up to 16KB), for increased performance
Wide Temperature Range
A wide operating temperature range of -40° - 75° C (-40° - 167° F) allows for installations in industrial environments with extreme hot or cold conditions
Electro Magnetic Compliance
Complies with FCC Part 15 Subpart B Class A and CE EN 55022 Class A standards
Certifications
Rated for information technology (ITE) equipment (EN55022/24), and industrial, scientific, and medical (ISM) Equipment (EN55011)
Shock and Vibration Resistant
Rated for shock (IEC 60068-2-27), freefall (IEC 60068-2-32), and vibration (IEC 60068-2-6)
Grounding Point
Grounding point protects equipment from external electrical surges
Specifications:
| © 2020 Respective owners and brand holders. This table has been carefully researched and generated by Laptop Direct CC (https://www.laptopdirect.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered. |
Specifications |
| Product Code | TI-F11SFP |
| Standards | IEEE 802.3 |
| IEEE 802.3u |
| IEEE 802.3ab |
| IEEE 802.3z |
| IEEE 802.3x |
| Device Interface | 1 x Gigabit port |
| 1 x Gigabit SFP slot |
| 4-pin removable terminal block |
| LED indicators |
| DIP Switch |
| DIN-Rail mount |
| Wall mount |
| Grounding point |
| Data Transfer Rate | Ethernet: 10Mbps (half duplex), 20Mbps (full duplex) |
| Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) |
| Gigabit: 2000Mbps (full duplex) |
| Fiber: 2000Mbps (full duplex) |
| Performance | Data RAM Buffer: 1MB |
| Jumbo Frame: 16KB |
| Special Features | Hardened components rated for extreme temperatures |
| 12 - 56V DC power input |
| Alarm Relay |
| Auto-Negotiation |
| Auto store and forward architecture |
| Automatic address learning and address aging |
| ESD 8KV and Surge 2KV protection |
| Power | Input: 12 - 56V DC |
| Compatible power supply: TI-M6024 (sold separately) |
| Max. consumption: 3W |
| Terminal Block | Power input: 4-pin terminal block |
| Wire range: 0.34mm^2 to 2.5mm^2 |
| Solid wire (AWG): 12-24/14-22 |
| Stranded wire (AWG): 12-24/14-22 |
| Torque: 5 lb. - In / 0.5Nm / 0.56 Nm |
| Wire strip length: 7-8mm |
| DIP Switch | 1: Turns LFP (Link Fault Pass Through) on/off |
| 2: Set SFP speed to 100Mbps or 1000Mbps |
| MTBF | 510,304 hours |
| Housing | IP30 metal case |
| DIN-Rail mount |
| Wall mount |
| Grounding point |
| 8KV ESD protection |
| 2KV surge protection |
| Operating Temperature | -40° - 75° C (-40° - 167° F) |
| Operating Humidity | Max. 95% non-condensing |
| Dimensions | 103 x 80 x 31mm (4.1 x 3.2 x 1.2 in.) |
| Weight | 142g (5 oz.) |
| Certifications | CE |
| FCC |
| Shock (IEC 60068-2-27) |
| Freefall (IEC 60068-2-32) |
| Vibration (IEC 60068-2-6) |
| IEC 61000-4-2 |
| IEC 61000-4-4 |
| IEC 61000-4-5 |
| PACKAGE CONTENTS | TI-F11SFP |
| Quick Installation Guide |
| Removable terminal block |
| DIN-Rail / wall mount kit |
©2026 Laptop Direct CC
E&OE Errors may occur and information is for reference purposes only and are subject to change without notice.
Images are for reference only. You may not copy, duplicate, reproduce the contents of this page or any other page for use in any e-commerce site or pricelists.
You may share this page, print and use sections of the text for reference purposes on condition that there is a clear and explicit credit to this site, ie: "https://www.LaptopDirect.co.za" must appear as a referal at all times.
