MIM-N5-45X4
Mimosa N5-45X4 5GHz 45 degrees 22 dBi Sector antenna
Mimosa N5-45X4 5GHz 45 degrees 22 dBi Sector antenna, Includes 4x LMR 240 Type N to Type N cables, 2x mounting brackets, Dual-slant 45 degrees polarization, 22 dBi gain
Overview:
Mimosa N5-45X4 - 4.9-6.4 GHz, 45° Antenna
The Mimosa N5-45x4 is the industry's first sector antenna to deliver the best of both worlds - incredible noise rejection and long-distance performance, with wideband 4.9-6.4 GHz operation for fixed wireless broadband.
- Industry-leading front-to-back ratio for 2x spectrum reuse
- World-class noise rejection
- Beamformed high-gain for long distances
- Wide-band 4.9-6.4 GHz sector
Specifications:
© 2025 Respective owners and brand holders. This table has been carefully researched and generated by Laptop Direct CC (https://www.laptopdirect.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered. | |
Specifications and features![]() | |
Product Code | MIM-N5-45X4![]() |
Antenna | |
Gain | 22 dBi (+3 dBi from beamforming) |
Polarization | Dual-slant 45º |
Azimuth Beamwidth (4 dB) | 45º |
Azimuth Beamwidth (3 dB) | 42º |
Elevation Beamwidth (3 db) | 9º |
Electrical Downtilt | 2º |
Front-to-Back Ratio (min) | 43 dB |
Cross-Polar Isolation | >30 dB |
Port-to-Port Isolation | >10 dB |
Impedance | 50 Ω |
Max Input Power | 30 dBm |
Dimensions | |
Height | 734 mm (28.88") |
Width | 143 mm (6.63") |
Depth | 76 mm (3.0") including connectors |
Shipping Box Dimensions | |
Height | 981 mm (38.62") |
Width | 166 mm (6.53") |
Length | 105 mm (4.13") |
Weight | 4.08kg (9.0 lbs) |
RF Connectors | 4 N-type female (includes four 1 meter LMR 240 Type-N to Type-N cables) |
RF Connectors Position | Back of antenna, near center |
Enclosure Characteristics | Outdoor, UV stabilized, engineered polymer |
Mounting | Galvanized steel, dual attached pole mount with 20º mechanical up or down tilt. Two mounting brackets included. For pole sizes, maximum is 3.5" (90 mm) and minimum is 1.5" (38 mm). |
Wind Survivability | 200 km/h (125 mph) |
Wind Loading | 4.77 kg @ 160 km/h (10.49 lbs @ 100 mph) |
Environmental | |
Outdoor Ingress Protection Rating | IP55 |
Operating Temperature | -40°C to +55°C (-40°F to 131°F) |
Operating Humidity | 5 to 100% condensing |
Operating Altitude | 4,420 m (14, 500') max |
Shock & Vibration | ETS 300-019-2-4 class 4M5 |
Regulatory and Compliance | |
RoHS Compliance | Yes |