MTAD-5G-30D3-PA
MikroTik mANT 30dBi 5Ghz Parabolic Dish antenna with precision aligmnent mount
MikroTik mant 30dBi 5GHz Parabolic Dish antenna with Precision aligmnent Mount, 2x RP-SMA Female (Outside Thread) connectors, Vertical and horizontal polarization, Aluminum reflector, +/- 2.5 degree beamwidth, Basebox Wireless device is not included, MTAD-5G-30D3-PA
Features:
- mANT30 is a professional class 5 GHz 30dBi dish antenna, built to the highest industry standards. Built to seamlessly accomodate our Basebox series products, but can be used for any pole mounted wireless device due to the adequate length of the included FlexGuide cable.
- Two antennas are available, with a standard type mount (MTAD-5G-30D3), and with a precision alignment mount (MTAD-5G-30D3-PA). The antennas come packaged with all necessary accessories and cables.
- Note: Basebox wireless device pictured for illustrative purposes. It is not included
Specifications:
© 2025 Respective owners and brand holders. This table has been carefully researched and generated by Laptop Direct CC (https://www.laptopdirect.co.za), however, errors and omissions may occur. Only references to South Africa apply. All products are sourced in South Africa from the official suppliers and the warranty is that of the local supplier. E&OE. This table and our site's content may be used on condition that this notice and link remains intact and unaltered. | |
Specifications and features![]() | |
Product Code | MTAD-5G-30D3-PA![]() |
Product code | MTAD-5G-30D3-PA |
Antenna gain | 30 dBi |
Beamwidth | +/-2.5 deg |
Connector | 2x RP-SMA Female (outside thread) |
Cross Polarization | >40 dB |
Diameter x Depth | 70 x 45cm (27.5 x 17.8in) |
Elevation adjustment range | +/- 15 deg |
Frequency Range | 4.7-5.875 GHz |
Front-to-Back Ratio | >30 dB |
Impedance | 50 ohms |
Operating Temperature | -50°C to 80°C(-49°F to 158°F) |
Outdoor Rating | ETSI EN 300 019-2-4 |
Packaged size | 73x73x20cm (29x29x8in) |
Packaged weight | 8.4 kg (18, 5) |
Polarization | Vertical and Horizontal |
Pole Mount Diameter Range | 3 to 10cm (1.2 to 3.9in) |
Port to Port Isolation | >40dB min |
Power Rating | 100W |
Reflector | Aluminum |
Standards | EN 302 326 DN1, DN2, DN3, DN5 |
VSWR | = 1.4 typ, = 1.8 max |
Weight | 5.7kg (12.6 lbs) |
Wind Load (125 mph) | 181.4kg (400 lbs) |
Wind Survivability | 201kph (125mph) |